| ITEM / MODEL | UV-75ATC | UV-75ATCC | |
|---|---|---|---|
| Controller | FANUC 0i - T | ||
| CAPACITY | |||
| Max. swing diameter | mm | Ø 850 | |
| Max. turning diameter | mm | Ø 750 | |
| Max. turning length | mm | 800 | |
| SPINDLE | |||
| Spindle speed | rpm | 20 - 1600 | |
| Spindle drive system | - | belt | |
| Pulley ratio | - | 1: 1.6 | |
| Spindle bearing diameter | mm | Ø 160 | |
| Spindle motor type | kW | 18.2 / 22 kW | |
| Spindle nose taper | ASA | A2-11 | |
| Chuck diameter | in | 24 (32) | |
| Max. spindle torque | N-m | 495 | |
| C-axis indexing resolution | degree | - | 0.01 |
| SECOND SPINDLE | |||
| Spindle taper | - | BT50 | BT50 |
| Max. spindle speed | rpm | - | 3000 |
| Spindle drive system | - | - | Belt |
| Pulley ratio | - | - | 0.1:0.3.2 |
| Spindle bearing diameter | mm | - | 100 |
| Spindle motor type | kW | - | (FANUC a6) 5.5 / 7.5 |
| Max. spindle torque | N-m | - | 105 |
| TRAVELS | |||
| X-axis travel | mm | -70 ~ +580 | |
| Z-axis travel | mm | 800 | |
| Rapid traverse- X axis | m/min | 20 | |
| Rapid traverse-Z axis | m/min | 24 | |
| Guideway type | - | Boxway (Linear) | |
| TURRET | |||
| Turret | - | ATC | |
| Indexing type | - | Rller-gear | |
| Number of tools | station | 12 | |
| Square tool shank size | - | BT50 | |
| Max. tool length | mm | 400 | |
| Max. tool weight | kg | 50 | |
| Max. magazine load | kg | 420 | |
| Tool change time | sec | 4.5 | |
| MOTOR | |||
| Spindle motor | kW | 18.5 / 22 | |
| X axis motor | kW | 3 | |
| Z axis motor | kW | 4 | |
| Hydraulic motor | kW | 2.2 | |
| Coolant pump motor | kW | 0.5 + 1 | |
| Rotary tool driving motor | kW | - | 5.5 / 7.5 |
| DIMENSION | |||
| Floor space (L x W) | mm | 3650 x 2700 | |
| Height | mm | 4037 | |
| Net weight | kg | 16000 | 16500 |
